Macrame Plant Hangers

Macrame, or the skill of knotting rope, is a famous way to make attractive plant hangers. You won’t get a better feeling than having something useful and beautiful for the home at the end of this method. It is the best way to add greenery to a place. They also free up floor space and keep the most poisonous plants out of the reach of your pets. They are one of the simplest Macrame crafts, to begin with. The simple knots, tied in various patterns, are used to make most macrame plant hangers.

This art is so simple to create that it may be completed in one day or even half a day. Almost everyone’s house in the past was decorated out with macrame plant hangers in a variety of colours and styles, made with various styles of macrame ropes.

Macrame plant hangers require only a few hours of effort and use affordable materials. The results are rustic, lovely, and can go with any décor. Furthermore, macrame plant hangers could be used for decorating both indoors and outdoors. The most basic and simplest macrame plant hanger may accommodate a variety of flower pot shapes.

Unlike crochet or knitting, the Macrame plant hanger project does not involve the use of needles, instead simply relying on your hands to tie knots. When tied using spiral knots, the loop that holds the plant hanger in place is very powerful.

Macrame Plant Hangers have been updated, and they are just as lovely to us as they were to those who knotted them earlier.

How Much Macrame Cord is required for Macrame Plant Hanger ?

The user is wondering how to measure the proper cord length for their macrame. It’s not only about cutting enough cords to cover the space on your mounting when determining how many you’ll need.

Most macrame knots require an even number of knots; if your macrame design has a lot of square knots, it’s preferable to work in four-fold multiplications. Macrame plant hangers are created mostly of square knots, which require four cords. Simply cut and put them to your mounting in groups of four to determine how many cords you’ll need to make a macrame plant hanger.

You’ll probably need an additional cord if your macrame plant hanger design includes a lot of knots. But if your design has a lot of straight strands, you can make the cord a little shorter. If the cord is thicker, it should be longer.

1. Single-Stranded Cords

Single strand cords take up more length per knot than braided ones. Always account for an additional cord when creating a fringe at the end of the macrame plant hanger.

2. Double-Stranded Cords

The macrame cord must often be four times the length of the item. Fold doubled cords in halves to make two separate cords, then proceed for approximately twice the length of the project when using double cords. You will need eight feet of cord per strand if you’re making a one-foot-long macrame plant hanger with double strands.

Method 1: Making Macrame Plant Hanger

It is possible to make a macrame plant hanger without a ring. There is nothing difficult about it. All you have to do is make a loop with the string you’re using, which will allow you to hang the plant hanger with a hook.

Step 1

The cord should be split into four pieces. Fold the cord in half with all four parts in your hand. Tie a loop in the centre of the 4 cord sections and a 2 ” overhand knot near the edges of the loop. The macrame plant hanger will be hung from this loop.

Step 2

Tie an overhand knot approximately 5-6” from the knot you formed in step 1 using two strands of cord hanging from a nail or coat hook.

Step 3

Make a knot with two extra strands approximately 6” below the first knot. Carry on with the following four strands in the same manner.

Step 4

Using one strand of cord from an adjacent cord set and one strand of cord from one of the cord sets, tie a knot about 6″ down from the last knot. Repeat with the last six chord strands.

Step 5

Make one large overhand knot halfway between the last row of knots and the end of the strands by gathering all of the cord’s strands together. Make the ends even by trimming them.

Cutting the cord into longer or shorter parts allows you to easily alter the size of your macrame plant hanger. You’ll also want to adjust the spacing between your knots.

Method 2: Making Macrame Plant Hanger

For another way to make a macrame plant hanger without a ring, you will need scissors, pots, plants, hooks, and spray paint. You can spray-paint some hooks or the pot to give it a lovely look.

Step 1

Start with eight strands of cord, each four feet long. Gather the rope and tie it all together with a knot on one end, leaving a tassel of a few inches.

Step 2

Make a square knot with two strands approximately 2 inches from the bottom tassel. Tie a second knot with the remaining two strands. Repeat this step two more times. At this stage, it should have the appearance of a four-leaf clover.

Step 3

The four knots should be spread out as much as possible. You’ll repeat Step 2, except this time you’ll use one strand from knot #1 and the other from knot #2.

Three inches above the first row of knots, make a square knot. Make a knot with the strands from knots #2 and #3. Again repeat this step two more times.

Step 4

To continue the design of the macrame plant hanger, tie another row of knots using alternating strands.

Step 5

Make 10 sets of right knots with a measurement of 8 inches above each knot. The top strands of each hanger are given a little more detail by this.

Step 6

Gather all 8 strands and tie another knot. Trim the ends to leave a 3-inch tassel.

How to Start a Macrame Plant Hanger with a Ring?

The larks head/vertical larks head, spiral stitch, and square knot are the only three knots you’ll need to start a macrame plant hanger with a ring. Because the spiral stitch and square knot are both variants of the same base knot, it’s more like two knots in practice. Before continuing to the steps, it’s a good idea to have a feel for each knot.

Step 1

You will need 8 pieces of macramé cord with a length of 200 inches each. Make 16 cords with a loop by folding the bundle in half. Tape the cords together. Cut a 75-inch-long length of rope to cover the ring.

Step 2

Fold the string in half and create a loop at the top with a larks head knot. Take the right-hand string and make a vertical lark head knot around the looped strands. Repeat with the left string until the loop is completely covered.

Step 3

Using a 40-inch piece of cord, make a loop. Remove the tape and fix it by wrapping it around the loop’s base. Make a knot and tuck it underneath the coiled cords. Now trim the loose ends.

Step 4

Split the 16 strings into four groups of four. Knot a 10-inch length of cord with a spiral stitch. Do the same with the other three cord groupings.

After 5 inches, tie a normal knot. Make a 5-inch length of square knots next. Carry on with the other three groupings. Tie 2 square knots with 2 strings from one group and 2 strings from the other group after skipping 4 inches.

Step 5

Skip 3 inches and repeat the process, this time securing neighbouring threads with square knots. If you’re working with a tiny pot, skip the second row.

Step 6

Skip one more 3-inch part to complete your macrame plant hanger, gather all of the strings, and tie everything together with a normal knot. Trim the bottom strings.

To hang your plant hanger, start by knotting a loop.

Fold all six cords in the centre. With the thumb and pointer finger on the left hand, pinch the 6 cords together about 2 inches from the top. With the thumb and pointer finger on the left hand, make a smaller loop if you want it to be shorter, and a larger loop if users want it to be larger.

How to make Macrame Plant Hanger without a Tassel?

You will need a cord, a plant pot, and any kind of small plant.

Step 1

Cut six equal lengths of a cord. Eyeball how low you want the plant to hang, then add a little more for knots and dangling beneath the plant. Ensure that each of the six is the same length.

Step 2

At one end, tie all six cord sections together. If desired, leave a little extra to dangle beneath your plant pot.

Step 3

Separate the six into two parts. Each piece should be tied with a knot. This knot should be centred on the pot’s bottom border.

Step 4

Then repeat the steps, separating the portions once again and connecting with the strand from the adjacent section this time. Tie knots in each new two-part segment. This series of knots should reach halfway up the plant pot’s side.

Step 5

Reverse the steps, dividing the cord again into two parts and tying knots in each. The top edge of the pot will have this series of knots.

Step 6

In the middle of the knots, place the pot. If necessary, tighten the knots. Gather all six strands of the cord and place them in a circle above the plant at your desired height. Make a knot with your fingers.

Now you just need to hang it!

With one hand, place the six inch cord perpendicular and on top of the cords you are holding on other hand. Then, using the right-hand cord, circle it behind the main “braid” and across to the front, directly below the left-hand short cord. Continue creating these not-too-tight circles around the “braid” until you’re nearly done.

How to Braid a Macrame Strand ?

It doesn’t matter which side you start on; the important part is that you tie the same knot on both sides.

If you want to braid a 12 cords macrame strand, four of the 12 cords should be separated. Double-check that you have two long and two short ones. This will be your first braid, and it will consist of four cords. One long cord must be on the left, two little cords in the center, and a second long cord just on right.

Place a piece of tape at the very top, underneath the hook, and at the bottom of the two middle cords. Because the two middle cords will stay in the same place the entire time, this will help eliminate tangles and confusion.

Then, pressing the far-right cord through to the loop of the “C” shape you made, crossing it over the cord you just brought over from the far left side and beneath the two centre cords. Once you have pulled the rope over from the far left side, follow the black arrows below to weave it. You are making a loop with the two middle cords.

Continue tugging to the far left side, as shown by the left arrow, with the cord remaining in your grasp. Around the two center cords, tie a loose knot. The far-left cord should now be on the right side, and the far-right chord should now be on the left side.

If you are braiding four strands of macrame, make the start of a four with strand one and the finish across strands two and three. now Bring Strand four under strands two and three, up through strand one, and out to the side, then bring strand four straight down over the top of strand one. As you move the knot up the side loops, make sure to keep Strands two and three straight.

Now pull it tight.

How to extend a macrame plant hanger?

There are certain times when you’ll want to extend your Macrame plant hanger: When you wish to enlarge or expand a part of the macrame plant hanger when one or more cords are too short to tie a knot with or When you want to add a different colour to your macrame plant hanger.

Adding cords is dependent on whether you want the cording to be visible and what kind of cording you’re using. If you wish the cording to be hidden, splice it into the Macrame plant hanger design. This is accomplished by unwinding the two ends of the cording that will be connected.

You can use fabric cement to keep them squeezed together. Then twist the ends together and let the cording connection dry completely before continuing with your knotting.

Placing a T-pin underneath the Macrame work where the new cord will be placed is another invisible way for adding a short cord or a cord of a different colour. Insert the new rope into the knotting as if it were a horizontal line. The ends can be glued or weaved in later with a needle or by hand.

If the Macrame cording’s fringe ends will be visible and part of the final macrame plant hanger’s texture, you can let the new cording’s loose ends dangle and knot them where needed.

Some hanging plants can be quite heavy depending on their size and kind of pot. Keep this in mind while hanging hooks on your walls or ceiling for the macrame plant hanger. To bear any weight, they must be properly anchored. For modest macrame projects, there seem to be wall and freestanding options, ceiling hooks, and even a suction cup window hook.

The natural beauty of macrame plant hangers used for various types of plants and pots in your home cannot be ignored. The majority of macrame plant hangers are placed in living rooms and kitchens with large windows that open to the garden, allowing the breeze to enter.